Interior Neon Lights For Cars

Interior Neon Lights For Cars

How to Wire you Car with Leds or Neon Lights

First off, there are hundreds of ways your car can be wired. A car is full of electronics and all of these electronics run off 12V DC power. This is the same power used in motorcycles, RV's and other machinery like tractors. All cars have a ground which is on the chassis of the vehicle; this is called negative or ground. So if you are going to wire something you can always hook the negative (black wire) of a led to the metal of the car exposes anywhere. The positive (white or red) needs to go to a 12V+ source in the vehicle. You must understand that LEDs only work in one polarity. If the wires are hooked up backwards they will not light up.

The best way to wire your car is to first find out what you're going to light up. Find the location you are going to mount the leds, and then look around the location for a source of power. For example, if you're going to mount the LEDS under the glove box dash: Find source of power behind the radio. The back of the radio has 2 types of 12V power you could use. 1. 12V+ Power which is always on, usually YELLOW and 2. A 12V+ power called remote (some times RED), which only comes on when you have your car ON. The remote wire is the best wire to use for 12V+ for running interior leds. You do not need to worry about installing switches to turn them off when you're leaving your car.

Other locations for power include your dome lights, which turn on only when the doors are open. You can create some nice led effects in your car if you wire to these. Installation of lights in the engine bay or front bumper can be wired to the headlights or park lamp lights. All you need to do is find which one is 12V+ and which ground. Simple wire to these and your lights only come on when you have the headlights or park lamp lights on. If you do not want to go that route, then you can wire the leds directly to the battery with a SWITCH INLINE. This is going to make things much more complicated because you need to figure how to get wires from the battery inside and create a circuit

Source:

http://ezinearticles.com/?How-to-Wire-you-Car-with-Leds-or-Neon-Lights&id=257449

Interior Neon Lights For Cars